聚碳酸酯,PC Radici Compounds PC10G10TL是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123,微信:13549213581 QQ:15397858 13549213581 肖生
聚碳酸酯PC, 玻璃纤维增强材料10%,良好的抗蠕变性,收缩性低
Radici Compounds PC10G10TL
聚碳酸酯
Radici Plastics USA, Inc.
Technical Data
产品说明
PC10G10TL is a toughened polycarbonate compound reinforced with 10% glass fiber. Developed for a wide range of injection molding applications, it is lubricated for ease of mold release.
Polycarbonate is an engineering thermoplastic widely recognized for outstanding toughness, excellent strength, rigidity and creep resistance, and dimensional stability. The reinforcement provided by the addition of glass fiber significantly improves rigidity and long term creep performance, especially at high temperatures, as well as dimensional stability. Practical toughness and ductility are substantially enhanced as a result of the alloying technology used for impact modification. The low and almost isotropic shrinkage characteristics of this composition permit the production of complex shape parts to very close dimensional tolerances.
Polycarbonate compounds must be dried prior to processing to fully realize the mechanical performance of the molded part.
总体
材料状态 • 已商用:当前有效
搜索 UL 黄卡 • Radici Plastics USA, Inc.
供货地区 • 北美洲
填料/增强材料 • 玻璃纤维增强材料, 10% 填料按重量
添加剂 • 润滑剂
• 尺寸稳定性良好 • 经润滑 • 收缩性低
性能特点 • 刚性,高 • 良好的抗蠕变性 • 脱模性能良好
• 高强度 • 韧性良好 • 延展性
外观 • 可用颜色 • 自然色
形式 • 颗粒料
加工方法 • 注射成型
物理性能 额定值单位制 测试方法
比重 1.24g/cm³ ASTM D792
收缩率 - 流动 (3.18 mm) 0.30 到 0.50% ASTM D955
吸水率 (24 hr) 0.12% ASTM D570
机械性能 额定值单位制 测试方法
抗张强度 2 (屈服, 23°C, 3.18 mm) 65.5MPa ASTM D638
伸长率 2 (断裂, 23°C, 3.18 mm) 7.5% ASTM D638
弯曲模量 (23°C) 3240MPa ASTM D790
弯曲强度 (23°C) 110MPa ASTM D790
冲击性能 额定值单位制 测试方法
悬壁梁缺口冲击强度 (23°C, 3.18 mm) 160J/m ASTM D256
热性能 额定值单位制 测试方法
热变形温度 (1.8 MPa, 未退火) 130°C ASTM D648
维卡软化温度 220°C ASTM D1525
补充信息
Elongation at Break, ASTM D638, Type I, 73°F, 0.125": 5-10 %
注射 额定值单位制
干燥温度 127 到 132°C
干燥时间 2.0 到 4.0hr
建议的最大水分含量 0.020%
螺筒后部温度 282°C
螺筒中部温度 288°C
螺筒前部温度 293°C
加工(熔体)温度 288 到 293°C
模具温度 71.1 到 93.3°C
背压 0.345 到 0.689MPa
螺杆转速 40 到 80rpm
聚碳酸酯,PC Radici Compounds PC10G10TL是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123 微信:13549213581 QQ:15397858
13549213581 肖生
|